08 Before drawings

Name some (e.g. I know two) ways how you can check what is included in cast unit / assembly…

Part level
Assembly/cast unit level
Both levels

Can one object belong to multiple phases at the same time?

Yes
No

When we are doing Tekla filters, a space separates two different values. In this example, Tekla will filter visible all SANDWICH cast units and PANEL cast units. How can we write one value that includes two words? In this example, we want to filter visible all SANDWICH PANELs.

This response will be reviewed and graded after submission.

We want to filter visible ONLY sandwich wall inner layers. What option is correct?

Filter only part

A
B
C

We want to filter visible WHOLE sandwich wall panels (all three layers with all the reinforcement and embeds). What option is correct?

A
B
C

How can we filter all visible steel parts? I will write three different ways for doing that.

This response will be reviewed and graded after submission.

What does mean * in filter values? Eg. Assembly Name = *PANEL*

This response will be reviewed and graded after submission.

Why can`t we filter by assembly material? What material can we filter instead and why can´t we filter using assembly materials?

This response will be reviewed and graded after submission.

When you create Model View/Visibility TEMPLATE filters then on what hierarchy level these filters are by default?

Part
Assembly
Rebar
Bolt
Weld
All of them
None of them. You need to set it always.

Write a filter (with 3 lines) that will show:
Assemblies that name is COLUMN and also
VERTICAL BRACING assemblies with profile HEA200 only

Note that this filter would not show:
VERTICAL BRACING with other profiles
HEA200 profile which is not VERTICAL BRACING

This response will be reviewed and graded after submission.

Which of the below statements are correct?

You can select objects from Tekla Organizer categories to show their information in Tekla Organizer Object Browser.
You can select objects from model view to show their information in Tekla Organizer Object Browser.
You can select objects from Excel report created by Tekla to show their information in Tekla Organizer Object Browser.
From Tekla Organizer Object Browser your can select objects that will be selected in model.
From Tekla Organizer Categories your can select objects that will be selected in model.

What this icon in front of the Organizer category means?

This category includes all assemblies or cast units.
This category includes only level 0 assemblies or cast units.
This category includes only sub-assemblies (assemblies that are not level 0).
This category includes parts that are connected with other parts somehow (not loose parts)

What this icon in front of the Organizer category means?

This category includes only parts that are not connected to any other part (loose parts).
This category includes all parts, not assemblies.
This category can include parts or/and assemblies.

How are marked unnumbered and not up-to-date objects position marks?

This response will be reviewed and graded after submission.

What does “Number series of the selected objects”?

Does numbering for all selected parts only.
Does numbering for all selected assemblies only.
Does numbering for all objects that have the same prefix with selected objects.
Does numbering for all objects that have the same starting number with selected objects.
Does numbering for all objects that have the same prefix and starting number with selected objects.
None of the above.

What does “Number modified objects”?

Tekla does numbering for all modified parts and assemblies. Objects that would get a position number first time will not get numbered.
Tekla does numbering for all modified parts, assemblies and rebars. Objects that would get a position number first time will not get numbered.
Tekla does numbering for all modified parts, assemblies, rebars. Also numbers all objects that will get first time a position number.
All options are wrong.

What affects numbering?

Top-in-form face
Class
Some (some can affect numbering and some can´t-we can set it) User Defined Attributes
Material
Modeling direction (Start-End points)
Profile
Starting number
Used components
Assembly main part (if numbering settings are set so)

When/why can we get “Overlapping position numbers” error and how can we avoid it?

This response will be reviewed and graded after submission.

Which mark numbers can you clear?

Rebar pos. numbers
Part pos. numbers
Assembly pos. numbers
GUID numbers

You have two different parts that will get different position marks. Then you modify them to be exactly the same and run the numbering again with these settings. What happens?

Both parts will get the same position mark.
Part marks will remain different.
Tekla gives error.

You have done (finalized) the assembly element shop drawing. After that, in the model, the element position number changes. What happens with the shop drawing?

Assembly element will loose the drawing and you need to create or clone a new drawing from scratch?
Nothing happens. You just need to update the existing drawing.
Tekla will not let you change the position numbers for elements that already have shop drawings.

08 Before drawings

08 Before drawings

Sten Tuudak 12.04.2025

Quiz Summary

Information

Results

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question

11. Question

12. Question

13. Question

14. Question

15. Question

16. Question

17. Question

18. Question

19. Question

20. Question

21. Question